Ariens Compact 24 Manuel de l'opérateur télécharger pdf (Page 10)

Step Three: Install

Discharge Chute Crank

1. Remove gear cover from top of chute pedestal.

2. Slide Chute Crank through the nylon bushing in the support

bracket under control panel.

NOTE: Be careful not to damage nylon bushing when attaching

crank to the control panel.

3. Connect the chute crank to the pinion gear on discharge chute

with spring clip pin.

4. Replace gear cover on top of chute pedestal.

5. Orient the chute and pedestal to its most vertical position and

tighten pedestal hardware to 14.8-31.0 lbf-ft (20-42 N∙m).

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 29 30

Pas de commentaire

Ariens Compact 24 Manuel de l'opérateur Page 10