Ariens Platinum 30 Manuel de l'opérateur télécharger pdf (Page 8)

Step One:

Assemble Handlebar

1. Remove the lower and loosen the upper hardware on the

handlebar assembly.

2. Loosen the hardware on the shift rod.

3. Put the speed selector lever in the sixth forward position.

4. Rotate the handlebar into operating position.

NOTE: Be careful not to damage cable spring hooks when rotating

handlebar upward.

5. Install and tighten the hardware on the handlebar assembly

and shift rod.

NOTE: This slide applies to

ATTACHED handlebars ONLY

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 31 32

Pas de commentaire

Ariens Platinum 30 Manuel de l'opérateur Page 8