Ariens 920402 - Sno-Tek 24E Manuel de l'opérateur télécharger pdf (Page 11)

EN – 10

SEPARATE AUGER HOUSING FROM

FRAME

NOTICE: Save all hardware for reinstallation.

1. Stop engine, remove key and wait for all moving parts

to stop and for hot parts to cool.

2. Disconnect spark plug wire from engine.

See Figure 5.

3. Remove spring clip from chute rotation rod and

remove rod.

See Figure 6.

4. Remove hairpin and sleeve bushing securing chute

deflector cable to deflector arm under control panel.

5. Remove cable from deflector arm and remove cable

snap from deflector anchor.

See Figure 7.

6. Loosen, but DO NOT remove hardware securing belt

cover to unit and remove belt cover.

Figure 5

1. Spring Clip

2. Chute Rotation Rod

Figure 6

1. Sleeve Bushing

2. Hairpin

3. Cable Snap

4. Deflector Arm

5. Deflector Anchor

Figure 7

1. Belt Cover

2. Tapping Screw

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 31 32

Pas de commentaire

Ariens 920402 - Sno-Tek 24E Manuel de l'opérateur Page 11